晨怡热管 >> 休闲号外 >> 热管名人 >> 林唯耕博士 Professor Wei-Keng Lin(续)

林唯耕博士 Professor Wei-Keng Lin(续)

晨怡热管 2006-11-5 4:15:53

 

學歷:
美國馬莉蘭大學 博士
地址:
新竹市光復路二段清華大學工科館517室
聯絡電話:
03-5715131Ext.42664( office )
0936-346399( mobile )
傳真:
03-5165707
E-MAIL:
wklin@ess.nthu.edu.tw
主要研究方向 :

熱流系統

電子元件冷卻理論與實驗測試

雙相流

人造衛星暨高空飛行物之熱傳元件

CPU散熱系統桌上型/筆記型

毛細泵吸環路應用

微機電系統

風扇性能與鰭片阻抗分析

(续)林唯耕博士 Professor Wei-Keng Lin

B. Conference & Proceedings

  1. H. W. Lin, W. K. Lin, “Experimental Analysis of the Reservoir Effects to Capillary Pumped Loop in One Unit Server,” The 8th International Heat Pipe Symposium, Kumamoto, Japan, September 24 - 27, pp247-251, 2006

  2. 陳紹文, 林唯耕, 徐金城, 林鴻輝, 周政泰, 沈聖智, 蔡明傑, "矽基微架構之毛細導流與沸騰極限可視化研究", 第十屆全國熱管會議, 貴州, 中國, , pp. 1-13 , 2006, 優秀論文獎

  3. 張立楷, 王士文, 林唯耕, "利用MEMS技術設計微型毛細泵吸環路", 第十屆全國熱管會議, 貴州, 中國,  pp. 311-317, 2006

  4. 傅裕修, 林唯耕, 周子仁,"熱介面材料(TIM)散熱膏之K值測定與分析", 第十屆全國熱管會議, 貴州, 中國, pp. 98-104,  2006

  5. 盧俊彰, 陳紹文, 林唯耕, 周賢民, "利用軸向熱傳模式預測熱管最大熱傳時之熱阻", 第十屆全國熱管會議, 貴州, 中國, pp. 149-156, 2006

  6. 黃彥銘, 林唯耕,"熱管最大熱傳量之蒸發部靈敏度分析", 第十屆全國熱管會議, 貴州, 中國, pp. 14-19, 2006

  7. 林鴻文, 吳明杰, 林唯耕, "弓型毛細結構於平版型毛細泵吸環路性能分析", 第十屆全國熱管會議, 貴州, 中國, pp. 303-310, 2006,優秀論文獎

  8. 江志偉, 林唯耕, "散熱模組之熱阻值快速預測理論分析(Q.T.T.)與量測", 第13屆非破壞檢測技術研討會, 桃園, 台灣, 2006

  9. W. K. Lin, C. C. Lu, "Fin Model Theory to Predict the Temperature Distribution of the Trapezoid Grooved Heat Pipe", 6th Minsk International Seminar, “Heat Pipes, Heat Pumps, Refrigerators”, Minsk, Belarus, 2005

  10. 王士文, 曾繁根, 林唯耕, "微型毛細泵吸環路蒸發區之快速填充並抗回衝微流道設計與研製", 中國機械工程學會第二十二屆全國學術研討會,中壢, 臺灣, 2005

  11. 盧俊彰, 林唯耕, "滲透度對熱管性能之影響",中國機械工程學會第二十二屆全國學術研討會, 中壢, 臺灣, 2005

  12. Y. C. Chan, W. K. Lin, " A Novel Quick Qmax Test Method and Experimental Investigation of Heat Pipes", Proceedings of the ASME Summer Heat Transfer Conference, v 4, San Francisco, California, USA, 2005,(EI)

  13. H. W. Lin, M. C. Wu, W. K. Lin, " Experiment of a Novel Capillary-Pumped Loop with a Semi-arc Porous Evaporator in 1U Simulation Cabinet", Proceedings of the ASME Summer Heat Transfer Conference, v 4, San Francisco, California, USA, 2005, pp. 543-547 [HT2005-72380] (EI)

  14. J. S. Chen, F. G. Tseng, and W. K. Lin, “應用於微型燃料電池之燃料注入及抗回衝流道系統設計, The 28th Conference on Theoretical and Applied Mechanics, Taipei, Taiwan, 2004, PP.2872-2875

  15. 憶湘、林唯耕,以基因演算法進行熱電致冷器之結構最佳化設計,第二十一屆中國機械工程學會學術研討會,台灣高雄,十一月,2004.

  16. Y. H. Cheng, W. K. Lin, “A Novel Quick Thermal Test Method and Mechanism for Coolers and Thermal Modules”, The 1st IEEE Technical Exhibition Based Conference on Robotics and Automation, Tokyo, Japan, 2004. PP. 87-88, (EI)

  17. Y. H. Cheng, W. K. Lin, S. D. Xu, “An Algorithmic Method for Predicting the Thermal Performance of Thermoelectric Cooling Modules”, 6th International Symposium on Heat Transfer, Beijing, China, pp. 159-164, June, 2004. (EI)

  18. Y. C. Chan, H. W. Lin, W. K. Lin, “Dynamic Tracing Method to Examine Maximum Heat Dissipate Ability of Heat-Pipe”,13th International Heat Pipe Conference, Shanghai, China, September, Vol.2, pp.311-316, 2004

  19. H. W. Lin, Y. C. Chan, W. K. Lin, "An Axial Model to Perform the Optimum Design of the Miniature Heat Pipe," 13th International Heat Pipe Conference, Shanghai, China, 2004

  20. H. W. Lin, Y. H. Cheng, W. K. Lin, "Two Phase Flow Numerical Methods to Predict the Optimum Performance of the Miniature Heat Pipe," 6th International Symposium on Heat Transfer, Beijing, China, pp. 350-355, June, 2004. (EI)

  21. 林鴻文, 鄭憶湘, 林唯耕, 周賢民 "微型熱管計算分析運用於廢熱移除之研究", 第九屆海峽兩岸環境保護學術研討會, 西安, 中國, 2004, pp.1307-1311

  22. J. H. Cheng, Y. T. Tseng, F. G. Tseng, W. K. Lin and C. C. Chieng, “Three-Dimensional Flow Network Self-Driven by Shaped Microchannels”, Proceedings of ASME Micro electro mechanical System Conference, Washington, D.C., U.S.A., 2003, PP.1-7 (EI)

  23. Y. J. Chuang, F. G. Tseng, and W. K. Lin, “A Thermal Droplet Generator with Monolithic Photopolymer Nozzle Plate”, IEEE Transducers 03,  Boston, USA, 2003. pp. 476-479,(EI)

  24. 鄭憶湘,林唯耕, 劉君愷 "熱電致冷器於模組應用中之特性分析",中國機械工程學會第二十屆全國學術研討會, 台北, 臺灣, 2003

  25. Y. J. Chuang, F. G. Tseng, and W. K. Lin, “A Photopolymer Micro injector with Monolithic Nozzle Array Plate”, 3C-2, 2002 Nanotechnology and MEMS conference, Cheng-Kung U., Tainan, Taiwan, (EI)

  26. F. G. Tseng, Y. J. Chuang, and W. K. Lin, “A Novel Fabrication Method Of Embedded Micro Channels Employing Simple UV Dosage Control And Antireflection Coating”, Technical Digest IEEE International Conference MEMS 2002,  Las Vegas, USA, 2002, pp.69-72, (EI)

  27. 品志,林唯耕, 周賢民 , “儲槽對毛細泵吸環路(CPL)熱控之影響”, 「民航學會/航太學會/燃燒學會」學術聯合會議暨第九屆國科會航太學門研究成果研討會,高雄,三月, 2002pp.119-126

  28. Y. J. Chuang, F. G. Tseng and W. K. Lin , "Reduction of Diffraction Effect of UV Exposure on SU-8 Negative Thick Photoresist by Air Gap Elimination" Fourth International Workshop on High-Aspect-Ratio Micro-Structure Technology, Baden-Baden, Germany , hosted by Forschungszentrum Karlsruhe, Germany, Program Microsystem Technologies, 2001 (The paper was submitted to "Microsystem Technologies Journal")

  29. 林唯耕, 陳紹文, “微小化毛細泵吸環路(miniature CPL)應用於筆記本計算機傳熱之研究”, 中國工程熱物理學會第十屆年會,山東,青島,傳熱傳質學 (上冊)pp.89-93, 2001

  30. 林唯耕、周彥廷、周賢民,以電子致冷晶片作為煙道採樣器冷卻系統之可行性研究”, The Seventh Mainland-Taiwan Environmental Protection Conference, 21 世紀可持續發展之環境保護,(下卷),PP.597-602, 2001

  31. J. Y. Wu, W. K. Lin, “The Design of the Axial Fan and its Simulations”, Proceedings of the Seventh National Conference on Computational Fluid Dynamics”, Vol. 2, P.28-31, 2000

  32. W. K. Lin,” An Improvement of the Cooling System for the Flue Gas Sampling Equipment”, The Sixth Mainland-Taiwan Environmental Protection Conference, pp.1379-1385, Dec. 1999

  33. 唯耕,陳福增,台灣石化煉油廠之逸散性排放源調查”, Proceedings of the 5th  Mainland-Taiwan Environmental Protection Conference (Vol.2), 21 世紀可持續發展的環境管理,東南大學(大陸),南京大學(大陸),中央大學(台灣),OCFESA主辦,5月,1998,PP.1361-1365.

  34. 唯耕、符策忠, “核燃料定位格架對水流分佈影響之分析研究”, 行政院原子能委員會, 專題研究計畫成果發表會, 11, 1996. PP. I-242-I-251.

  35. 唯耕,微重力下毛細作用雙相流環路(CPL)應用於電子零件散熱之可行性研究,太空科技研究成果研討會,台北,台灣,1996. PP.14-17.

  36. 唯耕,符策忠, “核燃料定位格架對水流分佈影響之實驗研究”, 行政院原子能委員會, 專題研究計畫成果發表會, 11, 1995. PP. I-308-I-324

  37. 唯耕,白寶實,微重力下梯型毛細結構熱管熱傳之機制研究(I)”,第三屆全國熱流會議, 高雄,台灣, 1995, pp.437-440.

  38. 唯耕,翁炳榮,陳品志,多孔絕熱柱對於梯型結構熱管之熱傳影響(II)”,第二屆全國熱流會議,中壢,台灣,1994, pp.105-108.

  39. T. K. Wang, B. S. Pei, W. K. Lin, " Void faction Determination Using Photon Penetration Method, "Proceedings of the Annual ROCAEC Nuclear Safety Meetings, Taipei, Taiwan, R.O.C (in Chinese),Vol.1. pp65-84, Nov. (1993)

  40. 宋盈徹, 王勝標, 林唯耕,”流孔板流量計的校正分析” Proceedings of the Second Conference of the Chinese Metrology Society, May., 1993, PP.283-312

  41. 戴良哲, 王勝標, 林唯耕,”熱電偶溫度計的校正分析” Proceedings of the Second Conference of the Chinese Metrology Society, May., 1993, PP.283-312

  42. Y. W. Wang, Y. Y. Hsu, B. S. Pei, W.  K. Lin, "Solid Trajectories, Bubble Velocities, and Drift-Flux Model in Three-Phase Flow," 1990, Nov., AICHE Annual Meeting, Chicago, IL, USA.

  43. W.K. Lin, "A Study on Heat Transfer Effect to the Trapezoid Grooved Heat Pipe in Micro Gravity(I)," CSME-HTD 3rd Conference,pp.437-440.

  44. W. K. Lin, B. S. Pei, C. H. Lee, K. H. Chien, Nov.(1991),"The Updating and Verification of Void Fraction and Two-Phase Flow Rate Measuring Techniques (II), "Proceedings of the Annual ROCEAC Nuclear Safety Meetings, Taipei, Taiwan, ROC(in Chinese),Vol.1,pp.1-12.

  45. Caly Dai, S. B. Wang, W. K. Lin, "A Simple Calibration Method of Thermocouple," the 2nd CMS Conference. (May.1993).pp313-334.

  46. Y. W. Wang, B. S.Pei, W. K. Lin, Aug.(1992)"A Semi-Empirical Model of Two-Phase Annual Flow, "Proceedings of the 28th AICHE/ANS National Heat Transfer Conference, San Diego.

  47. Y. C. Song, S. B. Wang, W. K. Lin, "A Simple Calibration Method of Orifice," 2nd CMS Conference (May 1993), pp283-310

  48. W. K. Lin "Study on the Void-Fraction Measurement by Using the Side-Tube In the Stram-Water Two-Phase Flow," NSC-Energy Conference, (Dec.1994), pp51-55

  49. W. K. Lin, O. B. Long, P. C. Cheng "The Heat Transfer Effect of the Porous material to the Trapezoid Wick structure Heat pipe II," CSME-HTD 2nd Conference, pp105-108.

  50. F. J. Munno, Y. Y. Hsu, M. Dimarzo, G. A. Pertmer, D.W. Sallet, M. Popp, M. Massound, W. K. Lin, "The University of Maryland 2x4 B&W Simulation Loop," Twelfth Water Reactor Safety Research Information Meeting, NUREG/CP-0058, Vol.1, pp.174, 1984.

  51. W. K. Lin, Y. Y. Hsu, 1984, "Two-Phase Flow Behavior Observed in A Transparent Inverted U-Bend," Twelfth Water Reactor Safety Research Information Meeting. NUREG/CP-0058, Vol. 1, pp.186. Also presented in the Proc. 3rd Inter. Top. Mtg. On Reactor Thermal Hydraulics at Newport, Rhode Island, Oct. 15, 1985.

  52. B. S. Pei, S. F. Wang, W. K. Lin, J. A. Jan, Dec. 28-29, 1988, "Establishment of Thermal Margin-Critical Power Ratio Calculating Methodology, for BWRS", Proc. of Annual ROCAEC Nuclear Safety Mtg, Taipei, ROC, 1-19 1-13.

  53. C. K. Shih, C. Pan, B. S. Pei, W. K. Lin, "Investigations into Water Hammer Phenomena in Nuclear Power Plants," Proc. of Annual ROCAEC Nuclear Safety Mtg, 1989, Taipei, Taiwan, ROC, 1-1-4, p.1-7.

  54. K. H. Chien, W. K. Lin, B. S. Pei and C.H. Lee, "The On Line Measurement of Void Fraction and Mass Flow Rate with a Side-Tube and an Orifice in Two-Phase Flow", The lst.  JSME/ASME Joint International Conference on Nuclear Engineering, Vol.1, p.151, Nov. 1991.

  55. W. K. Lin, B. S. Pei, N. M. Chung, Y. F. Chang, Nov. (1993)" Sound Attenuation and Its Relationship with interfacial Area Density in an Air/Water Two-Phase Bubbly Flow," Proceedings of the Annual ROCAEC Nuclear Safety Meetings, Taipei, Taiwan, ROC (in Chinese), Vol.1,pp593-616.

  56. W. K. Lin, B. S. Pei, J. P. Yu, "The Design of the CPL" The 1st. NSPO Conference, p.189, Feb. 1993.

  57. W. K. Lin, C. C. HO, "An Experimental Investigation of the Spacer Grid Configuration Effect to the Flow Distribution," AEC Nuclear Reactor Safety conference.Nov.1995, Vol.1, PP.308-324.

C. Technical Reports

  1. W. K. Lin, B. S. Pei, L.M. Chung, K. S. Chien, "The Measurement and Calibration on the Void Fraction of the Two-Phase Flow and the Two-Phase Mass Flow Rate(1)," THNE-90-H04, Internal Report.

  2. W. K. Lin, Y. Y. Hsu, B. S. Pei, L.M. Chung, Y.P. Chang, "The Study on the Compressibility of the Air Bubble in Two-Phase Flow," TRI-78-PM-244.

  3. W. K. Lin, B. S. Pei, K. S. Chien, "The Measurement and Calibration on the Void Fraction of the Two-Phase Flow and The Two-Phase Mass Flowrate(II)," THNE-90-H10, Internal Report.

  4. W. K. Lin, B. S. Pei, "The Heat Transfer Effect of the Termosyphon Heat Pipe," THNE-92-H03, Internal Report.

  5. W. K. Lin, B. S. Pei, Y.P. Chang, "Sound Velocity and its Relationship with Interfacial Area Density in Steam-Water Two-Phase Bubbly Flow," THNE-92-H07, Internal Report.

  6. W. K. Lin, Berry Pern, "The Local Technique Source Integrate Proposal Under the Executive Yuan for the HSINCHU Area, Individual Investigate Report," THNE-92-HLL, Internal Report.

  7. W. K. Lin, Y. Y. Hsu, "ATAG Heat Pipe Fine Model, " Submitted to OAO Co., Feb. 6, 1986.

  8. B. S. Pei, W. K. Lin, 1P, Ma., 1988, "The Study to the Pressure Drop and the Flow Distribution on the T-Junction Two-Phase Flow," THNE-88-H09, Internal Report.

  9. B. S. Pei, F.S. Wang, W. K. Lin, J. A. Jan, July 1988, "Establishment of Thermal Margin-Critical Power Ratio Calculating Methodology for BWRs", THNE-88-H03, Internal Report.

  10. Y. Y. Hsu, W. K. Lin, B. S. Pei, "The Study of the flow Patterns of the three-Phase Flow," NSC78-0413-E007-10, 1989.

  11. B. S. Pei, W. K. Lin, Y. W. Wang, J. G. Hoong, Feb., 1989, "Using Image Proceeding Techniques to Analyze Bubble Size, Velocity, Void Fraction and Their Distributions, in Two-Phase Flow Patterns," THNE-88-H11, Internal report.

  12. B. S. Pei, W. K. Lin, Y. P. Ma, Y. C. Chian, Sep., 1989, "The Two-Phase Flow Pressure Drop and Phase Separation Analysis on a Tee-Junction," THNE-89-H08, Internal Report.

  13. Y. Y. Hsu, W. K. Lin, B. S. Pei, Y.W. Wang, Oct., 1989, "The Study on Three-Phase Flow," THNE-89-H12, Internal Report.

  14. W. K. Lin, B. S. Pei, N. M. Chung, K. S. Jan ,"The Accuracy Benchmarking and Methods Improving of the Two-Phase Void Fractions and Two-Phase Flow Rates Measurements(I),"THNE-90-H04,Dept.of Nuclear Engineering, National Tsing-Hua Univ., Taiwan. R.O.C., Aug.1990

  15. 林唯耕,"筆記型電腦微熱管性能測試之研發",清華大學工程與系統科學系,國科會計畫研究報告,NSC 89-2212-E-007-0422000.10

  16. 林唯耕,"超臨界濕式氧化處理低放射性廢料之熱效率分析與工程設計",清華大學工程與系統科學系,國科會88年度電力科技產業學術合作研究計畫研究成果報告,計畫編號21880361999.07

  17. 林唯耕,"高效率雙相流熱移裝置之熱空系統設計與實驗()",國科會計畫,NSC86-2212-E-007-0631997.07

  18. 林唯耕微重力下梯型毛細結構熱管熱傳之機制研究(I)”,清華大學核子工程研究所,國科會計畫,NSC83-0401-E007-0881994.07

 
责任编辑: banye 参与评论
本站地图|热管配套|企业邮局|产品说明

Copyright © 1996-2010 China Harbin DawnHappy Heat Pipe Technology Co., Ltd.
哈尔滨晨怡热管技术有限公司   电话:0451-82589558 82589508 82589538   传真:0451-82552085 技术支持:13704813968
地址:哈尔滨市南岗区南通大街256号  邮编:150001  电子信箱:heatpipe@yahoo.cn   heat-pipe@hotmail.com heat.pipe@yahoo.com.cn 
本站永久域名:http://china-heatpipe.net     http://heatpipe.net.cn    http://rg.nx8.net     http://nx8.net  
中华人民共和国信息产业部ICP/IP地址信息备案:黑ICP备07500228  哈尔滨市公安局国际联网备案登记:哈公网监备23010002001165

Powered By: KingCMS 3.0 Beta